Oil and Gas Epoxy Paint Systems
MR0103-2012 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
SSPC-SP 1, Solvent Cleaning- This specification covers the requirements for the solvent cleaning of steel surfaces. Solvent cleaning is a method for removing all visible oil, grease, soil, drawing and cutting compounds, and other soluble contaminants from steel surfaces. It is intended that solvent cleaning be used prior to the application of paint and in conjunction with surface preparation methods specified for the removal of rust, mill scale, or paint.
SSPC-Paint 39 Two-Component Aliphatic Polyurea Topcoat, Fast or Moderate Drying, Performance-Based. This specification contains performance requirements for a two-component, weatherable polyurea topcoat. The coating may be fast or moderately fast drying. Coatings meeting the requirements of this specification are generally suitable for exposures in Environmental Zones 1A (interior, normally dry), 1B (exterior, normally dry), 2A (frequently wet by fresh water, excluding immersion), and 2B (frequently wet by salt water, excluding immersion). Resistance of polyurea topcoats in Environmental Zones 3B (chemical exposure, neutral) and 3C (chemical exposure, alkaline) can vary based upon formulation. The coating manufacturer should be contacted for specific chemical resistance data if required. The specified coating is intended for application by single-component airless spray, electrostatic spray, or plural-component equipment, depending upon its formulation. This coating is intended for use as a topcoat over suitably primed ferrous metal and cementitious substrates.
- SSPC-AB 1, Mineral and Slag Abrasives
- SSPC-AB 2, Cleanliness of Recycled Ferrous Metallic Abrasives
- SSPC-AB 3, Ferrous Metallic Abrasive
- Paint 44, Liquid-Applied Organic Polymeric Coatings and Linings for Concrete Structures in Municipal Wastewater Facilities, Performance-Based
- SSPC-Paint 101, Aluminum Alkyd Paint (Type I, Leafing and Type II, Non-Leafing)
- SSPC-Paint 104, White or Tinted Alkyd Paint
- SSPC-Paint 15, Steel Joist Shop Primer
- SSPC-Paint 16, Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint
- SSPC-Paint 20, Zinc-Rich Coating, Type I-Inorganic and Type II-Organic
- SSPC-Paint 23, Latex Primer for Steel Surfaces
- SSPC-Paint 24, Latex Semigloss Exterior Topcoat
- SSPC-Paint 25, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel, Type I and Type II
- SSPC-Paint 25.1BCS, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel
- SSPC-Paint 27, Basic Zinc Chromate-Vinyl Butyral Wash Primer
- SSPC-Paint 28, Water-Borne Epoxy Primer for Steel Surfaces
- SSPC-Paint 29, Zinc Dust Sacrificial Primer, Performance-Based
- SSPC-Paint 30, Weld-Through Inorganic Zinc Primer
- SSPC-Paint 32, Coal Tar Emulsion Coating
- SSPC-Paint 33, Coal Tar Mastic, Cold Applied
- SSPC-Paint 34, Water-Borne Epoxy Topcoat for Steel Surfaces
- SSPC-Paint 36, Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-Based
- SSPC-Paint 38, Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat
- SSPC-Paint 39 Two-Component Aliphatic Polyurea Topcoat, Fast or Moderate Drying
- SSPC-Paint 8, Aluminum Vinyl Paint
- SSPC-Paint 9, White (or Colored) Vinyl Paint
- SSPC-Paint COM, Commentary on Paint Specifications